Paralinx Crossbow HD-SDI to HDMI Converter for Wireless Video Transmitters

Paralinx Crossbow HD-SDI to HDMI Converter for Wireless Video Transmitters

The Paralinx Crossbow SDI to HDMI Converter converts an HD-SDI video signal to an HDMI signal that conforms to the input requirements of the Paralinx Arrow and Arrow Plus wireless video transmission systems. The HDMI port is designed so that the Arrow transmitter can plug directly into it. It features a 1/4″-20 thumbscrew, allowing you to mount the Crossbow and transmitter directly to many cameras, as well as a wide range of camera support hardware, mounts, and adapters.


  • For Paralinx Arrow and Arrow Plus
  • Arrow Transmitter Plugs Directly In
  • USB Power Link for Transmitter
  • Universal 1/4″-20 Thumbscrew
  • Will Not Pass Embedded Audio
  • Does Not Support 23.98 PSF

Visit Website


A 5 to 30V DC input allows the Crossbow to be powered from a variety of battery sources; and a 5V USB power output specifically supplies power to the Arrow transmitter. To power the device you will need to pick up either the separately available Paralinx PowerTap Cable or the separately available Paralinx Lemo Cable depending on your requirements.

The Crossbow supports video only, and will not pass embedded audio. Additionally, it will not support 23.98 PSF.


1x HD-SDI on BNC connector

1x HDMI female
1x USB Type A female for powering Arrow transmitter

Supported Frame Rates
23.98p, 24p, 25p, 29.97p, 30p, 50i, 50p, 59.94i, 60i, 60p

Power Requirements
5 – 30 VDC

Packaging Info
Package Weight 1.15 lb
Box Dimensions (LxWxH) 7.0 x 5.5 x 3.6″

Additional information

Weight 1.15 lbs
Dimensions 7 × 5.5 × 3.6 in